OK, after my initial hick up. I’ve created 2 shooting boards. The first is a 90 degree shooting board. This is probably the one that I will need the most often. Notice the high fence and the runners that the hand planes can ride.
I also created one type of 45 degree miter shooting board. I may have to make an attachment for the 90 degree shooting board that will cover the other type of 45 degree miter shooting board. It also has runners for the hand planes. The fence is 3/4″ which is not quite as high as the 90 degree shooting board (which is 1 3/8″ high).
This last shot shows the shooting board which has a very low fence and has a shooting board so that you can see the difference in fence height. I guess this shot also shows a better shot of the runners on the sides of the shooting board.
I may have to create new ones over time as I use them but these are good starts for some of the work I’ll need to do.
